Stanford Research Systems www.thinksrs.com-IG1dualapp free download

File name www.thinksrs.com-IG1dualapp.pdf

www.thinkSRS.com 1 Dual Ionization Gauge Connector Box Option O100IG The standard IGC100 controller can connect to, and display pressures from, only one ionization gauge. The Dual Ionization Gauge Connector Box (SRS Model # O100IG) is an optional component that, when attached to an IGC100, makes it possible to simultaneously connect two ionization gauges to the IGC100. An IGC100 properly fitted with the O100IG optional box can switch operation between two independent ionization gauges (i.e. sequential operation) from the front panel, and measure pressure at a first or second location (IG1 or IG2) at a small fraction of the cost of a second instrument. The O100IG option is easily installed in the field making it easy to extend the capabilities of the IGC100 controller as needed. In This Application Note What does the Kit include? 3 Installation 3 (408)744-9040 Stanford Research Systems www.thinkSRS.com 2 Dual Ionization Gauge Connector Stanford Research Systems (408)744-9040 www.thinkSRS.com Dual Ionization Gauge Connector 3 What does the Kit include? The O100IG Option Kit includes all the components required to add a second ionization gauge connection port to your IGC100 controller. The basic package includes... 1. Dual Gauge Connector Box. 2. Connection Cable ( connects O100IG box to IGC100 controller) 3. Mounting pins ( for side mounting) 4. Fastening screw (for side mounting). 5. Instructions sheet. Installation IMPORTANT For the most compact design and safest operation, SRS recommends you mount the O100IG box on the left side of the IGC100 controller as shown below in Fig. L-1. However, side mounting is not a requisite for the proper operation of the O100IG option (i.e. steps 1